3 HP cabinet table saw
The 3 HP cabinet saw needs a 240V circuit. The Amazon pick is the nearest contractor-class alternative; check its listing for voltage, since the saving is only real if it runs on a circuit you already have.
Layout · Three-car, 32 x 24
Woodshop layout for a 32x24 three-car garage
A woodshop in a 32 x 24 ft garage with no vehicle inside: all 9 machines fit. 7 circuits including 240V, subpanel around 100 A, and 671 of 768 sq ft is aisle, operator zone and open floor rather than machine.
1. Cabinet table saw (66 x 47 in)2. 14 in bandsaw (25 x 18 in)3. 3 HP cyclone dust collector (33 x 33 in)4. Tool bench (Jointer, Planer, Drill press) (96 x 28 in)5. 6 ft workbench (72 x 24 in)6. Miter saw station (96 x 30 in)7. Steel shelving unit (60 x 24 in)8. 20 gallon compressor (28 x 20 in)
machinebenchoperator zonevehicle
What fits in a 32x24 three-car garage for woodshop
| # | Machine | Footprint | Size source |
|---|---|---|---|
| 1 | Cabinet table saw | 66 x 47 in | listing |
| 2 | 14 in bandsaw | 25 x 18 in | listing |
| 3 | 3 HP cyclone dust collector | 33 x 33 in | listing |
| 4 | Tool bench (Jointer, Planer, Drill press) | 96 x 28 in | planning allowance |
| 5 | 6 ft workbench | 72 x 24 in | planning allowance |
| 6 | Miter saw station | 96 x 30 in | planning allowance |
| 7 | Steel shelving unit | 60 x 24 in | planning allowance |
| 8 | 20 gallon compressor | 28 x 20 in | planning allowance |
| - | Hanging air filter (hangs from the ceiling) | 20 x 17 in | listing |
Every machine in this trade's package found a place on the floor.
Where the floor goes
| Item | Sq ft | Share |
|---|---|---|
| Garage floor | 768 | 100% |
| Vehicles | 0 | 0% |
| Machine and bench footprints | 97 | 13% |
| Aisles, zones and the door apron | 671 | 87% |
There is room to spare, so the next purchase can be a bigger machine rather than a smaller bay. Footprints are the machine's own size; the zones and aisles are why a garage "feels" smaller than the sum of its machines.
Can you actually rip an 8 ft board?
An 8 ft board through the cabinet table saw needs about 16 ft of clear line (the saw's depth plus about 1.5 times the stock). In this plan the clearest run is 13 ft with the vehicle out: short . The usual answers are an outfeed table that folds away, breaking sheets down outside with a track saw, or putting the saw on a mobile base and rolling it to the middle of the bay.
Woodshop notes for this bay
Sawdust is the real tenant here. Run collection at the saw and the planer first, keep the air filter above the work, and keep a fire extinguisher where the finishing happens.
Circuits for this layout
| Circuit | Volts | Breaker | Wire | Receptacle |
|---|---|---|---|---|
| Cabinet table saw | 240V | 20 A | 12 AWG | NEMA 6-20R |
| 14 in bandsaw | 120V | 20 A | 12 AWG | NEMA 5-20R |
| 3 HP cyclone dust collector | 240V | 30 A | 10 AWG | NEMA 6-30R |
| Tool bench (Jointer, Planer, Drill press) | 120V | 20 A | 12 AWG | NEMA 5-20R |
| Miter saw station | 120V | 20 A | 12 AWG | NEMA 5-20R |
| 20 gallon compressor | 120V | 20 A | 12 AWG | NEMA 5-20R |
| Shared bench circuit 1 | 120V | 20 A | 12 AWG | NEMA 5-20R (several) |
That is 7 circuits, about 55 A of demand after diversity, and a subpanel in the 100 A range to ask your electrician about. Sizes use NEC Table 430.248 for motor amps and Table 310.16 (60 C column) for wire; have a licensed electrician confirm. The workshop amps calculator lets you change the loads.
Which machines belong on mobile bases
| Machine | Weight we can state | Base rating to shop for |
|---|---|---|
| Cabinet table saw | 508 lb (listing) | 670 lb or more, e.g. VEVOR Mobile Base |
| 14 in bandsaw | 207 lb (listing) | 270 lb or more, e.g. WEN Mobile Base |
| 3 HP cyclone dust collector | 400 lb (listing) | 520 lb or more, e.g. VEVOR Mobile Base |
The woodshop package for a 32x24 three-car garage: Amazon and Grizzly
One card per machine in the plan. Each shows the Amazon pick and the Grizzly Industrial pick for the same job.
14 in bandsaw
Both are 14 in, 1 HP saws that run on 120V. The Grizzly saw is the established cast-iron-table pick; the Amazon pick is dual-voltage and ships to your door.
3 HP cyclone collector (240V)
AmazonNo comparable Amazon item in our catalog
Nothing on Amazon in our catalog matches a 3 HP, 1654 CFM cyclone, so this one is Grizzly-direct only. It needs a 240V circuit and about 400 lb of freight.
6 ft adjustable workbench
Choose the Amazon bench to keep spending down; choose the Grizzly bench when you run power tools on it every weekend and want the built-in outlets.
20-gallon quiet compressor
Both are oil-free, quiet-series 20-gallon compressors, so they are tolerable in an attached garage. Pick on the sale, the warranty path and the noise rating you can live with.
Prices change often and Grizzly runs sales, so the buttons show current prices.
Rest of the shop: the small gear
Storage, bases and safety items for this layout.
Prices change often; the button shows today's price on Amazon.
Email me the buy list for this layout
Every machine, bench and base in this plan as one list you can keep, with the circuits it needs. Plus a few short emails, then a couple a month at most.
Unsubscribe anytime. You can also just read the checklist on this site.Size the systems for this garage
- Heater size for a 32x24 three-car garage
- Dust collector size for a 32x24 three-car garage
- Shop lighting for a 32x24 three-car garage
- Air filtration for a 32x24 three-car garage
- Mini-split size for a 32x24 three-car garage
- Subpanel for a woodshop
- 240V in a garage, explained
Fit sheets for the machines in this plan
- Fit sheet: grizzly g1023rl cabinet table saw
- Fit sheet: grizzly g0555 14 inch bandsaw
- Fit sheet: grizzly g0441 3hp cyclone dust collector
- Fit sheet: miter saw station
- Fit sheet: 20 gallon air compressor
Other trades and garage sizes
- Machine shop in a 32x24 three-car
- Welding and fab in a 32x24 three-car
- Auto and mechanic in a 32x24 three-car
- Mixed shop with a car parked in a 32x24 three-car
- Woodshop in a 12x20 one-car
- Woodshop in a 12x22 one-car
- Woodshop in a 20x20 two-car
- Woodshop in a 22x22 two-car
- Woodshop in a 24x24 two-car
Frequently asked questions
Can I fit a table saw in a 32x24 three-car garage?
Yes: the plan places a cabinet table saw at 66 x 47 in with its operator zone clear. Ripping long boards still needs the car out or an outfeed that folds away.
What circuits does a woodshop need in a 32x24 three-car garage?
The machines in this plan need 7 circuits: 2 at 240V and 5 at 120V, which suggests a subpanel in the 100 A range. Have a licensed electrician confirm the service and the panel.
How much floor is left in a 32x24 three-car garage after a woodshop?
About 671 of 768 sq ft, 87 percent, is aisle, operator zone and door apron once Cabinet saw, Bandsaw, 3 HP cyclone, and Tool bench and the rest are placed.
This page is researched guidance, not professional electrical, engineering or safety advice. Circuits, loads and clearances depend on your house, your service and your town: have a licensed electrician confirm any wiring, and check local code and each manufacturer's manual before you act.
