3 HP cyclone collector (240V)
AmazonNo comparable Amazon item in our catalog
Nothing on Amazon in our catalog matches a 3 HP, 1654 CFM cyclone, so this one is Grizzly-direct only. It needs a 240V circuit and about 400 lb of freight.
Machine fit · Grizzly G0441
Will the Grizzly G0441 fit your garage?
The Grizzly G0441 measures 32.9 x 32.9 in (2.7 x 2.7 ft) and weighs 400 lb, runs on 240V at 22 A. It fits with operator room in 6 of our 6 garage sizes, the smallest being the 12x20 one-car, and it fits with a sedan parked inside from the 12x22 one-car up.
32.9 x 32.9 infootprint
400 lbship weight
240V22 A
3 HPmotor
From the grizzly.com listing: 1654 CFM at 2.0 in SP, 8 in inlet, 55 gal drum, rated for three machines at once.
Fit in each garage size
| Garage | Alone, operator room | Car parked, working | Car parked, stored | Share of floor |
|---|---|---|---|---|
| One-car, 12 x 20 | yes | no | no | 3% |
| One-car, 12 x 22 | yes | yes | yes | 3% |
| Two-car, 20 x 20 | yes | yes | yes | 2% |
| Two-car, 22 x 22 | yes | yes | yes | 2% |
| Two-car, 24 x 24 | yes | yes | yes | 1% |
| Three-car, 32 x 24 | yes | yes | yes | 1% |
"Operator room" keeps 12 in clear around the machine, and "stored" drops that zone, for a machine you roll out only when the car is gone. Both leave a 24 in apron in front of the overhead door and a 30 in walk-around beside any parked sedan. In a 12 x 20 ft garage with a car inside, this machine has to be stored elsewhere.
Electrical and moving it
- Circuit: 22 A at 240V on the listing: a 30 A breaker and 10 AWG copper covers the 125 percent rule. On NEC Table 430.248 amps the same 3 HP motor comes to 25 A and 10 AWG on a 30 ft run. Have a licensed electrician confirm.
- Moving it: at 400 lb (shipping weight) a mobile base rated 520 lb or more is the minimum, for example the VEVOR Mobile Base.
- Delivery: machines this heavy usually arrive by freight on a pallet. Plan the path from the curb to the bay, the door width and who helps you lift.
Buy the G0441, or compare the Amazon pick
Same job, two ways to buy, with one line on when each wins.
Prices change often and Grizzly runs sales, so the buttons show current prices.
Moving and protecting it
Prices change often; the button shows today's price on Amazon.
Email me the buy list for a shop built around this machine
The machine, its base, its circuit parts and what goes beside it, as one list. Plus a few short emails, then a couple a month at most.
Unsubscribe anytime. You can also just read the checklist on this site.Compare the G0441 head to head
Where to see it placed
Other machine fit sheets
- grizzly g0945 benchtop jointer
- grizzly t34608 benchtop drill press
- grizzly g4000 metal lathe
- grizzly g0602 metal lathe
- grizzly g0704 mill drill
- grizzly g0408 wide belt sander
Frequently asked questions
Does the Grizzly G0441 fit in a one-car garage?
Yes, in a 12 x 20 ft one-car garage with no vehicle it fits with its operator zone clear and uses 3 percent of the floor. With a sedan parked inside it does not fit at all.
What circuit does the Grizzly G0441 need?
It draws 22 A at 240V (listing), so a 30 A breaker with 10 AWG copper covers the 125 percent rule. On NEC table amps for 3 HP the circuit comes out to a 25 A breaker and 10 AWG copper over a 30 ft run. A licensed electrician confirms the circuit before you wire.
This page is researched guidance, not professional electrical, engineering or safety advice. Circuits, loads and clearances depend on your house, your service and your town: have a licensed electrician confirm any wiring, and check local code and each manufacturer's manual before you act.
