Hybrid table saw for a 120V garage
Both are 10 in saws in the 1-3/4 to 2 HP class. Pick Amazon for the SawStop contractor saw; pick Grizzly for an enclosed cabinet hybrid you can order direct and wire for 120V or 240V.
Machine fit · Grizzly G0771Z
Will the Grizzly G0771Z fit your garage?
The Grizzly G0771Z measures 64 x 40.5 in (5.3 x 3.4 ft) and weighs 324 lb, runs on 120V at 15 A. It fits with operator room in 6 of our 6 garage sizes, the smallest being the 12x20 one-car, and it fits with a sedan parked inside from the 20x20 two-car up.
64 x 40.5 infootprint
324 lbship weight
120V15 A
2 HPmotor
From the grizzly.com listing: 30 in right rip, table 40-1/2 x 27, 35-3/8 in table height, base footprint 19-1/2 x 21. Also wirable for 7.5 A at 240 V.
Fit in each garage size
| Garage | Alone, operator room | Car parked, working | Car parked, stored | Share of floor |
|---|---|---|---|---|
| One-car, 12 x 20 | yes | no | no | 8% |
| One-car, 12 x 22 | yes | no | yes | 7% |
| Two-car, 20 x 20 | yes | yes | yes | 5% |
| Two-car, 22 x 22 | yes | yes | yes | 4% |
| Two-car, 24 x 24 | yes | yes | yes | 3% |
| Three-car, 32 x 24 | yes | yes | yes | 2% |
"Operator room" keeps 30 in clear around the machine, and "stored" drops that zone, for a machine you roll out only when the car is gone. Both leave a 24 in apron in front of the overhead door and a 30 in walk-around beside any parked sedan. In a 12 x 20 ft garage with a car inside, this machine has to be stored elsewhere.
Stock clearance
This is a stock-fed machine. For 8 ft boards it needs about 15 ft of clear line; the 12 x 20 bay offers 20 ft with nothing else in it and 22 ft in a 22 x 22. Where the bay is short, the answer is an outfeed support that folds away or a mobile base that rolls the machine to the open middle.
Electrical and moving it
- Circuit: 15 A at 120V on the listing: a 20 A breaker and 12 AWG copper covers the 125 percent rule. On NEC Table 430.248 amps the same 2 HP motor comes to 30 A and 10 AWG on a 30 ft run. Have a licensed electrician confirm.
- Moving it: at 324 lb (shipping weight) a mobile base rated 430 lb or more is the minimum, for example the WEN Mobile Base.
- Delivery: machines this heavy usually arrive by freight on a pallet. Plan the path from the curb to the bay, the door width and who helps you lift.
Buy the G0771Z, or compare the Amazon pick
Same job, two ways to buy, with one line on when each wins.
Prices change often and Grizzly runs sales, so the buttons show current prices.
Moving and protecting it
Prices change often; the button shows today's price on Amazon.
Email me the buy list for a shop built around this machine
The machine, its base, its circuit parts and what goes beside it, as one list. Plus a few short emails, then a couple a month at most.
Unsubscribe anytime. You can also just read the checklist on this site.Compare the G0771Z head to head
- Cabinet table saw vs hybrid table saw for a garage
- Grizzly G0771Z vs G0962 hybrid table saw
- Grizzly G0771Z vs SawStop 1.75 HP contractor saw
- Jobsite table saw vs hybrid table saw for a garage
Where to see it placed
Other machine fit sheets
- grizzly g0962 open stand table saw
- grizzly g0555 14 inch bandsaw
- grizzly g0860 cyclone dust collector
- grizzly g0441 3hp cyclone dust collector
- grizzly g0945 benchtop jointer
- grizzly t34608 benchtop drill press
Frequently asked questions
Does the Grizzly G0771Z fit in a one-car garage?
Yes, in a 12 x 20 ft one-car garage with no vehicle it fits with its operator zone clear and uses 8 percent of the floor. With a sedan parked inside it does not fit at all.
What circuit does the Grizzly G0771Z need?
It draws 15 A at 120V (listing), so a 20 A breaker with 12 AWG copper covers the 125 percent rule. On NEC table amps for 2 HP the circuit comes out to a 30 A breaker and 10 AWG copper over a 30 ft run. A licensed electrician confirms the circuit before you wire.
This page is researched guidance, not professional electrical, engineering or safety advice. Circuits, loads and clearances depend on your house, your service and your town: have a licensed electrician confirm any wiring, and check local code and each manufacturer's manual before you act.
