Machine class fit sheet
Will a 60 gallon compressor fit your garage?
A 60 gallon compressor (our planning allowance) measures 36 x 24 in (3.0 x 2.0 ft), runs on 240V at 28 A. It fits with operator room in 6 of our 6 garage sizes, the smallest being the 12x20 one-car, and it fits with a sedan parked inside from the 12x22 one-car up.
36 x 24 infootprint
n/aweight not stated
240V28 A
5 HPmotor
This sheet describes a class of machine. The footprint is our planning allowance, not a single product's measurement: check the dimensions in the listing of the machine you choose.
Fit in each garage size
| Garage | Alone, operator room | Car parked, working | Car parked, stored | Share of floor |
|---|---|---|---|---|
| One-car, 12 x 20 | yes | no | no | 3% |
| One-car, 12 x 22 | yes | yes | yes | 2% |
| Two-car, 20 x 20 | yes | yes | yes | 2% |
| Two-car, 22 x 22 | yes | yes | yes | 1% |
| Two-car, 24 x 24 | yes | yes | yes | 1% |
| Three-car, 32 x 24 | yes | yes | yes | 1% |
"Operator room" keeps 12 in clear around the machine, and "stored" drops that zone, for a machine you roll out only when the car is gone. Both leave a 24 in apron in front of the overhead door and a 30 in walk-around beside any parked sedan. In a 12 x 20 ft garage with a car inside, this machine has to be stored elsewhere.
Electrical and moving it
- Circuit: 28 A at 240V on the planning allowance: a 35 A breaker and 8 AWG copper covers the 125 percent rule. On NEC Table 430.248 amps the same 5 HP motor comes to 35 A and 8 AWG on a 30 ft run. Have a licensed electrician confirm.
- Moving it: weight is not stated in our sources: read the listing, then size the base with the mobile base calculator.
Buy on Amazon
Prices change often; the button shows today's price on Amazon.
Moving and protecting it
Prices change often; the button shows today's price on Amazon.
Email me the buy list for a shop built around this machine
The machine, its base, its circuit parts and what goes beside it, as one list. Plus a few short emails, then a couple a month at most.
Unsubscribe anytime. You can also just read the checklist on this site.Where to see it placed
Other machine fit sheets
- mig welder 240v
- grizzly g1023rl cabinet table saw
- grizzly g0771z hybrid table saw
- grizzly g0962 open stand table saw
- grizzly g0555 14 inch bandsaw
- grizzly g0860 cyclone dust collector
Frequently asked questions
Does the 60 gallon compressor fit in a one-car garage?
Yes, in a 12 x 20 ft one-car garage with no vehicle it fits with its operator zone clear and uses 3 percent of the floor. With a sedan parked inside it does not fit at all.
What circuit does the 60 gallon compressor need?
It draws 28 A at 240V (planning allowance), so a 35 A breaker with 8 AWG copper covers the 125 percent rule. On NEC table amps for 5 HP the circuit comes out to a 35 A breaker and 8 AWG copper over a 30 ft run. A licensed electrician confirms the circuit before you wire.
This page is researched guidance, not professional electrical, engineering or safety advice. Circuits, loads and clearances depend on your house, your service and your town: have a licensed electrician confirm any wiring, and check local code and each manufacturer's manual before you act.
