Sizing

Air filter CFM for a 22x22 two-car garage shop

A 22 x 22 x 9 ft garage holds 4,356 cubic feet, so 6 air changes per hour takes 436 CFM: 2 Grizzly G0738 on its 409 CFM speed. At 10 air changes it takes 726 CFM, or 2 units.

By the GarageShopCalc editors · Updated 2026-10-13 · Researched from manufacturer specifications, code tables and verified owner reviews

CFM and units by air-change target

Hanging air filters for 4,356 cu ft
Target	CFM needed	G0738 at 260 CFM	at 362 CFM	at 409 CFM
6 air changes per hour	436	2	2	2
8 air changes per hour	581	3	2	2
10 air changes per hour	726	3	3	2

Air changes per hour = CFM x 60 / room volume. The G0738 speeds (260, 362 and 409 CFM) are the figures on the grizzly.com listing. At full speed one unit gives 5.6 air changes per hour in this garage. A filter polishes the air after the collector has done its job; it does not replace capture at the machine, and a respirator is still the thing between you and the dust you cannot see.

Hang it where it can circulate the room, near the table saw side and away from the collector exhaust, and set the timer so it keeps running after you stop cutting.

Shop for this size

Matched to the result above.

POWERTEC AF4001E 3-Speed RF Remote Controlled Air Filtration POWERTEC Under $250 Check price on Amazon

WEN 3410 3-Speed Remote-Controlled Air Filtration System WEN Under $250 Check price on Amazon

GVS Elipse P100 Dust Half Mask Respirator GVS Under $50 Check price on Amazon

NoCry Clear Safety Glasses NoCry Under $25 Check price on Amazon

Prices change often; the button shows today's price on Amazon.

Amazon and Grizzly, side by side

Each card shows an Amazon pick and a Grizzly Industrial pick for the same job.

Hanging air filter

POWERTEC AF4001E 3-Speed RF Remote Controlled Air Filtration See on Amazon

Grizzly G0738 3-Speed Hanging Air Filter Buy direct at Grizzly

Both are 3-speed ceiling-hung filters in the 300 to 400 CFM class with remotes. The Grizzly unit is owner-rated 4.8 on grizzly.com across 301 reviews.

Prices change often and Grizzly runs sales, so the buttons show current prices.

Get the garage shop planning checklist

One printable page: measure the bay, count the circuits, list the machines, check the floor. Plus a few short emails, then a couple a month at most.

Unsubscribe anytime. You can also just read the checklist on this site.

Air filtration by garage size: the other answers

Frequently asked questions

How many air changes per hour does a 22x22 two-car shop need?

Six is a common shop convention for light dust and ten for heavy sanding days. For 4,356 cubic feet that is 436 to 726 CFM.

This page is researched guidance, not professional electrical, engineering or safety advice. Circuits, loads and clearances depend on your house, your service and your town: have a licensed electrician confirm any wiring, and check local code and each manufacturer's manual before you act.